We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Amada Semi-Automatic Metal Cutting Miter Band Saw — HK400

hk400

Overview

Saw Head Frame

The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy duty worm drive gear reducer, the band drive motor and saw guide arm mounting supports.

Band Wheels & Drive System

The inverter controlled band drive motor is directly coupled to the worm gear reducer eliminating friction losses of a variable speed pulley drive. The drive wheel transmission is designed and manufactured by Amada to provide a high efficiency speed reduction, which requires no external cooling to deliver more power to the drive wheel. Band speed is set on using the band speed adjustment knob on the control panel.

Canted Head and Single Column Mounting

The head is canted 8 º to enable the machine to cut rolled sections e.g. I beams or rectangular tubing at significantly faster rates because the blade is never in full contact with the horizontal section of the material. The single column mounting enables the saw guides to be much closer together compared to scissor type machines which improves the cutting performance.

Full Stroke Clamping Vise

The full stroke clamping vise reduces the operator’s setup time for different widths of material.

Manual Vise Inching Control

The vise inching control enables the operator to more accurately locate the work piece for the cut because he can inch the vise until it is just touching the material but not clamped hard. Then with the help of the shadow line projector, make any small adjustment to the position to produce the desired cut.

Guarding

The saw band is constrained within the heavy gage guarding in all non-cutting areas.
 

Specifications

Machine Capacity

Round

12.6 in

320 mm
Rectangle
W x H

0.3 – 16 x 11 in

8 – 400 x 280 mm
Weight
890
lbs. Max
400
kg Max.

 

Miter

Round

8.7  in

220 mm
Rectangle
W x H   @45 °

0.3 – 8.7  x 11 in

8 – 200 x 280 mm

 

Saw Blade

Width

1
1/4 in.

34
mm
Gage

0.042
in.

1.06
mm
Length

153
in.

3,885
mm
Band
twist

60 °
Band
speed

99-330
fpm.

30-100
mpm.
Blade
cutting angle
8 °

 

Band Wheels

Diameter

16
in.

400
mm
Material

Cast
iron
Idler
wheel adjustment

3.4
in.

86
mm
Band
tension

Manual

 

Material Table

Height

32
in

800
mm
Number
of rollers

3
Roller
diameter

20
in

52
mm
Weight
capacity

882
lbs.

400
kg

 

Index and Discharge Tables

Index
stroke


0.2 – 19.7 in


1-500 mm
Height

27.5
in.

700
mm

Weight capacity


5,800 lbs.


h

 

Motors

Drive

3
hp

2.2
kW.
Hydraulic

1
hp

0.75
kW.
Cutting
fluid

0.08
hp

60
W.
Chip
brush


0.05 hp

40
W.

 

Fluid Capacities

Hydraulic

10.5
gal.

40
l.
Hydraulic
pump delivery

4.2
gpm.

15.7
lpm.
Hydraulic
pump capacity

384
psi
27 kg/cm  ²
Cutting
fluid

10.5
gal.

40
l.
Finish

Urethane
hammer effect
Color

Amada
focal orange and black
Machine
weight

2,000
lbs.

910
kg
Height

74.2
in. Max

1,865
mm Max
Floor
area

77.6
x 56.3 in.

1.97
x 1.43 M

 

Electrical Equipment

Electrical enclosure with door mounted, fused main line disconnect switch. The panel contains motor starter relays with overloads, drive motor inverter, control voltage transformer (110 v secondary) terminal strips and control relays. The operator’s control interface has all manual and automatic function initiation. Supply voltage 208-230v/60/3.
 

Standard Equipment

  • Spring loaded tungsten carbide saw blade guides
  • Inverter controlled band drive motor
  • Manual quick approach of saw head
  • Hydraulic feed control
  • Auto detection of cut complete
  • Work clamp vise inching control
  • Shadow line projector to indicate cutting plane
  • Saw head up position timer
  • Large diameter, electrically driven chip brush
  • Full stroke clamping vise
  • High intensity shadow line projector to indicate cutting plane
  • Band break limit switch
  • Large diameter protractor for setting cutting angles

 

Accessories

Optional Power Supply Transformer

Optional power supply transformer
Optional
power supply transformer for voltages
420/460 v  

 

Idler Roller Table

Size

31.5
in. wide x 118 in.

800
mm x 3,000 mm
Capacity

8,800
lbs.

4,000
kg

 

Work Tray Roller

Work tray roller which assists in supporting longer work pieces.

 

Click here  to contact us or call 800-622-1363 to place an order and get answers to your questions.