We’re Here to Help. Talk to a Specialist Today!


201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan  Horizontal Mitering Saw — PA 2743S/1/1.5/3



Heavy duty dual post, two way swiveling horizontal, metal cutting band saw with 10 H.P. 2″ blade, and up to 60 degree mitering. Capacity    27.5” x 43”



  •    Capacity:  
  • 90 DEGREES;                   27.5” x 43” ( 700 x   1100mm)                                  28” Round (715mm),
  • 45 DEGREES;                 26.75” x 27.5”   (680 x 700mm)                              26.75” Round (680mm)
  • 60 DEGREES;                18.875” x 27.5” (480x700mm)                                  18.875” Round (480mm)
  • Blade:    2” x 31’ 6” x .063” (54 x 9600 x 1.6mm)
  • Saw Frame:    The saw frame is canted at a 8 degree angle for faster cutting of structural and other flat materials. The saw base is  Swivels to 45 Degrees one direction and 60 Degrees the other,  for miter cutting. A  ½ hp (400 W.) motor turns the machine base and the degree of angle is read out on a  LED DISPLAY.   The  Heavy Duty Saw Frame  rides up and down a  Linear Way Guide System.
  • Blade Tension:    Hydraulically controlled tension (35,000 psi) provides consistent square cutting accuracy. The  Motion Detector  will shut the machine off should a blade break or stall.    Blade Wheel Diameter  is 34.625” to provide maximum blade life.
  • Speed Range:    50-325 SPFM (15-100m/min.) infinitely variable through a frequency inverter system and a heavy duty  Worm Gear Transmission.  The broad speed range allows for optimum cutting of a large spectrum of materials. An  Electric Tachometer  assures accurate speed settings.
  • Hydraulic Down Feed:    Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
  • Motors:   
  • Blade Drive: 10 H.P. (7.5 kW).
  • Hydraulic Pump Motor: 3 H.P. (2.2 kW).
  • Oil Mist Coolant System: 1/4 HP, (180W)
  • Wire Brush Motor: 1/8 HP (90W),
  • Table Rotation: 1/2 HP, (400W)
  • Blade Guides:   A combination of roller bearing and hydraulically actuated carbide blade guides assures the blade is held taut for fast, accurate cuts.. The cast iron Movable Guide Arm is positioned through a Hydraulic Cylinder, then is Hydraulically Locked in position.
  • Chip Brush: An  Independent Motor  drives the  Blade Brush  to assure complete removal of chips from each gullet of the blade assuring optimum cutting performance and enhanced blade life.
  • Fast Approach:    Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.  
  • Vise Jaws:   Full Stroking Vise Jaws and a Vertical Clamp  Devise  assure  the work piece is secure and eliminating   excessive vibration during the cut providing better blade life and cleaner cuts.   Minimum Clamping Capacity  is         16.125” (410mm).
  • Controls: An Independent Electric Cabinet and Control Panel  allow the operator to position the controls for optimum viewing of the cutting area.   A  PLC  controls all electrical and hydraulic functions.
  • Machine Floor Space:  88   ½” H x 165 3/8” W x 74 5/8” D    (2250Hx 4200Wx 1900Dmm)
  • Machine Wt.:  17,600 lbs (8000kg)


Other Features

  • Miter Cutting 45-0-60
  • 34 5/8″ Diameter Blade Wheels
  • Automatic Saw Frame Return
  • Laser cut line indicator
  • Independent Electrical Cabinet and Operator Control
  • Work Light
  • Powered Angle Setting w/LED Display
  • Independent Drive Blade Brush
  • Oil Mist Coolant System
  • Feed Pressure Compensation System
  • Infinitely Variable Blade Speed
  • Vertical Clamping Devise
  • Powered Moveable Guide Arm w/Lock
  • Hydraulically Actuated Carbide Blade Guides
  • Full Stroke Vise Jaws
  • 8 Degree Canted Saw Frame
  • Coolant Flush Hose
  • One Parts and Operational Manual
  • One Saw Blade
  • Hydraulic capacity………………………………………………………….…………………………………….16 gals. (60L)
  • Table Height……………………………………………………………………………………………….…..…37in. (940mm)



Capacity 45 ° 26.75” x 27.5”   (680 x 700mm)
Capacity 60 ° 18.875” x 27.5” (480x700mm)
Capacity 90 ° 27.5” x 43” ( 700 x   1100mm)
Blade Size 2” x 31’ 6” x .063” (54 x 9600 x 1.6mm)
Blade Tension 35,000 PSI
Speed Range 50-325 SPFM (15-100m/min.)
Blade Drive 10 H.P. (7.5 kW)
Hydraulic Pump 3 H.P. (2.2 kW)
Oil Mist Coolant System 1/4 HP, (180W)
Wire Brush Motor 1/8 HP (90W)
Table Rotation 1/2 HP, (400W)
Machine Floor Space 88   ½” H x 165 3/8” W x 74 5/8” D    (2250Hx 4200Wx 1900Dmm)
Machine Weight 17,600 lbs (8000kg)
Table Height 37in. (940mm)


Click here  to contact us or call 800-622-1363 to place an order and get answers to your questions.