We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan  Horizontal Post Style Saw — PA700 HD

MarvelSawPA700-HD

Overview

Heavy-duty, double column, horizontal, metal cutting band saw with 15 H.P. and 2-5/8″ blade. Capacity  28” x 32”

 

Features

  • Capacity:    28” x 32” Rectangle ( 711 x 812mm), 28” Round ( 711mm), 9” Min. Clamp Width
  • Blade:    2-5/8″ x 27’ 4” x .060” ( 67 x 8300 x 1.6mm)
  • Heavy Duty Construction:    The saw frame is constructed of 3/4” plate stock with a 12” square tube running across its top to prevent deflection when the blade is put under tension.
  • Blade Tension:    Hydraulically controlled tension (40,000 psi) provides consistent square cutting accuracy. The  Motion Detector  will shut the machine off should a blade break or stall.
  • Speed  Range:    Blade speeds are infinitely variable through a frequency inverter and heavy duty  Worm Gear Transmission.  Blade speeds are adjustable form 50-260 SFPM. The broad speed range allows for optimum cutting of a large spectrum of materials.  
  • Hydraulic Shuttle Feed:   Length settings of 0 – 20” are made using the EPC Controll. The heavy duty cast iron shuttle table travels on two large hardened and chromed cylindrical ways assuring cutoff length accuracy. Repeatability is  +  .005 per index.
  • EPC Programmable Control:  Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to nine jobs. Inputs include  Part Lengths  from 0 to 999” (in inches up to 3 decimal places) and  Number of Pieces  to be cut.   The  Blade Speed  is displayed on and set using the touch screen, but is not stored in memory.   The Automatic Piece Counter stops each job when the pre-set number of cuts have been made.   The control provides the option of running up to 9 jobs consecutively. The shuttle maximum single stroke is 20”.
  • Hydraulic Down Feed:    Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
  • Motors:   
  • Blade Drive: 15 H.P. (11.25kW).
  • Hydraulic Pump Motor: 5 H.P. (3.7kW).
  • Coolant Pump Motor: 1/4 H.P. (.1875kW).
  • Blade Guides:    Hydraulic controlled solid carbide blade guides are actuated when the machine’s hydraulic system is started to assure the blade is held taut for fast, accurate cuts. The cast iron guide arms are positioned automatically when the machine vise jaw is set in position.
  • Piece Counter:    The machine will stop the automatic cycle when a predetermined number of cuts have been reached.
  • Out-of-Stock-Switch:    The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
  • Chip Brush:    Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance.
  • Fast Approach:    Work height is automatically set allowing the head to rise just enough to clear the work-piece, reducing cycle time and allowing for faster cutting performance.
  • Cut Indicator Light:    The cut line indicator light is positioned on the dovetail above the blade and casts a shadow indicating the true cut line which aids in set-up and assures first cut accuracy.
  • Vise Jaws:   Patented  Hydraulic, Full Stroke for ease of setup. Available with variable vise pressure for thin wall material. Also provided is an out of stock switch. The rear hydraulic shuttle vise floats to accommodate the cutting of crooked material.   Special front vise jaws allow for remnants as small as 2”.
  • Weight Capacity:    The machine’s weight capacity is 30,000 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.

IMPORTANT  :  Standard discharge options: Specify  flat discharge tray  or  roller discharge  with your saw order.

 

Other Features

  • Positive Hydraulic Down Feed
  • 30-3/4” Diameter Blade Wheels
  • Blade Breakage and Motion Detector
  • Free Standing Operator Controls w/Pendent
  • Automatic Saw Frame Return
  • Automatic Chip Auger
  • Out of Square Protection
  • Double Column Feed System w/Sealed Bearings
  • Coolant Flush Hose
  • One Parts and Operational Manual
  • One Saw Blade
  • Weight of crated machine………………………………………………………………………………………….…15,400 lbs.
  • Hydraulic capacity………………………………………………………………………………………………….…26-1/2 gals.
  • Coolant capacity………………………………………………………………………………………………………26-1/2 gals.
  • Table height…………………………..………………………………………………………………………….………..…28 in.

 

Specifications

Capacity 28” x 32” Rectangle ( 711 x 812mm)
Capacity 28” Round ( 711mm)
Blade Size 2-5/8″ x 27’ 4” x .060” ( 67 x 8300 x 1.6mm)
Blade Tension 40,000 PSI
Speed Range 50-260 SFPM
Blade Drive 15 H.P. (11.25kW)
Hydraulic Pump 5 H.P. (3.7kW)
Coolant Pump 1/4 H.P. (.1875kW)
Weight Capacity 30,000 lbs

 

Click here  to contact us or call 800-622-1363 to place an order and get answers to your questions.