We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan Horizontal Mitering Saw — S 330/2/HV

MarvelSawSale-S3302HV

 

Overview

Swivel head, high speed, horizontal, metal cutting band saw with 3 H.P., 60 degree miter cutting, and hydraulic vise. Capacity 12″ x 18″.

 

Features

  • Capacity:
  • Blade:  13’ 6” L x 1” W x .035” T (4115 x 27 x 0.9 mm)
    • 45 °:   11” H x 12” W Rectangle (280 x 300 mm), 13” Round (330mm)
    • 60 °:      11” H x 8” W ( 280 x 203 mm), 9.5” Round (240mm)
    • 90 °:   12” H x 18” W Rectangle (300 x 460 mm), 13” Round (330mm)
  • Blade Tension:   Manual tension (30,000 psi) provides consistent square cutting accuracy.
  • Speed Range:    Blade speed is infinitely variable through  an Inverter Drive heavy-duty worm gear transmission.   Blade speeds are 0 to 330 FPM.   The broad speed range allows for optimum cutting of a large variety of materials.
  • Hydraulic Down Feed:   Infinitely variable  feed rate is hydraulically controlled for fast, accurate cutting.   Settings are made at the operator’s control station.
  • Hydraulic Frame Return:  The saw frame is raised hydraulically using a push button mounted on the operator’s control panel.
  • Motors:
  • Blade Drive:  3 H.P. (1.5kW).
  • Hydraulic Pump:  1/2 H.P. (0.375kW)
  • Coolant Pump Motor:  1/8 H.P. (0.09 kW).
  • Machines are available with either 230 or 460 volt, 3 ph., 60 Hz. Electrics.   Voltage must be specified on original order. (208 volt requires a boost transformer part number V10/SP2095).
  • Blade Guides:    Carbide  Blade Guides  provides reduced vibration, heat and blade stress providing longer blade life and accuracies of  +  .002 per inch of cut material.
  • Chip Brush:    Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
  • Vise Jaw:  Hydraulic vise design clamps and holds the work piece securely.   The vise is operated by a selector switch located on the operator’s control panel.   Maximum vise opening is 18” (460 mm).
  • Swivel:   The saw frame swivels a full  60 degrees  to the rear and 45 degrees to the front for optimum miter cutting capability.   The pivot shaft has sealed bearings for maintenance free operation, while a  pointer and angle scale  (-60o  TO  +  45o  ) make setup fast and easy.   Stops are provided at -60 and +45 degrees.
  • Operators Control Panel:    Operation of the machine is safe and convenient from the swing arm pedestal mounted on the machine base.    Control Voltage is 110V.

 

Specifications

Capacity  45 °   11” H x 12” W Rectangle (280 x 300 mm)
Capacity  60 °   11” H x 8” W ( 280 x 203 mm)
Capacity 90 °   12” H x 18” W Rectangle (300 x 460 mm)
Blade Size   13’ 6” L x 1” W x .035” T (4115 x 27 x 0.9 mm)
Blade Tension   30,000 PSI
Speed Range   85, 150, 230 and 330 SFPM
Blade Drive   3 H.P. (1.5kW)
Hydraulic Pump   1/2 H.P. (0.375kW)
Coolant Pump   1/8 H.P. (0.09 kW)

 

Click here  to contact us or call 800-622-1363 to place an order and get answers to your questions.