We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan Ironworkers — MSIW50S

Spartan-Ironworkers-—-MSIW50SFeatures

MSIW50S- Heavy-duty, Single Cylinder, Completely Integrated Ironworker with 50 Ton Capacity, 5 H.P., 7” Throat Depth, 5 Work Stations and Full Pedal Control.

Punching

  • Punch Pressure: 50 tons
  • Punch Holder and Jog Mode
  • Punch Work Table:  Includes mechanical backgauge
  • Standard Tooling:  1” in 1/2” material
  • Oversize Tooling:  4” in 1/8” material
  • Throat Depth:  6-1/2”
  • Stroke Length:  1-1/8”
  • Cycles per Minute in 9/16”:  20
  • Punching Station Work Height:  36-3/4″

Flat Bar Shearing

  • Flat Bar Shear Capacity:  7-7/8” x 19/32″
  • Lower Blade:  Four (4) usable edges
  • Support Table:  Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right
  • Upper Shear Blade:  Provides for minimum distortion
  • Width and Thickness: 11-3/4″ x 1/2″
  • Blade Length:  12-7/16”
  • Angle Flange Trim: 3-5/32″ x 3/8″
  • Flat Bar Shear Work Height:  37”

Angle Shearing

  • 90 degrees:  4” x 4” in 3/8”
  • 45 degrees: 2-3/4″ x 1/4″
  • Shearing with no material loss and minimum deformity
  • Shear Blades:  Four (4) usable edges
  • Angle Shear Work Height:  44-7/8”

Bar Shearing

  • Round Bar:  1-3/16″
  • Square Bar:  1”
  • Channel Shear: 3-5/32″ x 1-3/4″
  • H Beams: 3-5/32″ x 1-3/4″
  • T Beams: 1-1/2″ x 3/16″
  • Bar Shear Work Height:  36-3/4”

Notching

  • Rectangular Notcher:  5-16” x 1-3/8″ x 3″
  • Large V:  4” x 4” x 3/16″
  • Work Height: 36-3/4″

Special Tooling

  • Single Vee Press Brake: 4″ x 1/2″
  • Multi Vee Press Brake: n/a

Additional Specifications

  • Motor Drive: 5.36 H.P.
  • Weight: 2568 lbs.
  • Power (Pressure): 50 tons
  • Dimensions L x W x H: 56-1/4″ x 37-3/8″ x 66-1/4″

Other Standard Equipment Five(5) Sets of Punches and Dies:

  • Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
  • Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
  • CPD Series: 20 punch, 55 die
  • Magnetic Base Work Light
  • 24 Volt DC Control Voltage
  • Scrap Boxes at Punching and Notching Stations
  • Hydraulic Hold-Downs at Shearing Station
  • Adjustable Back Gauge- Mechanical (3’)
  • Adjustable Stroke Depth at Punch Station
  • Full-Control Foot Pedals
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling
  • Standard Voltage 230/460 Volt, 3 Phase, 60Hz

Specifications

Punching Pressure 50 Tons
Oversize Tooling 4” in 1/8” material
Standard Tooling 1” in 1/2” material
Throat Depth 6-1/2”
Stroke Length 1-1/8”
Punching Station Work Height 36-3/4”
Round Bar Capacity 1-3/16”
Square Bar Capacity 1”
Rectangular Notcher
5/16″ x 1-3/8” in 3”
Punches
9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
Dies 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
Machine Net Weight 2568 lbs
Machine Dimensions 56-1/4” L x 37-3/8” W 66-1/4” H
 Flat Bar Shear Capacity 7-7/8” x 19/32″
Blade Length 12-7/6”
Capacity 90° 4” x 4-3/8″

 

Click here to contact us or call 800-622-1363 to place an order and get answers to your questions.