We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan Ironworkers — MSIW60D

Spartan-Ironworkers-—-MSIW60DFeatures

MSIW60D- Heavy-Duty, Dual Cylinder, Completely Integrated Ironworker with 60 Ton Capacity, 7 H.P., 10” Throat Depth, 5 Work Stations and Simultaneous Dual Operation.

Punching

  • Punch Pressure:  60 tons
  • Punch Holder and Jog Mode
  • Punch Work Table: Includes back gauge and adjustable stops
  • Adjustable See-Through Punch Stripper: For fast and easy setup
  • Die Holder:  Adjustable in machined T-slots for quick punch and die alignment
  • Standard Tooling:  1/2” in 1/2”
  • Large Tooling:  1-1/2” in 3/8”
  • Oversize Tooling:  4” in 1/8”
  • Throat Depth:  10”
  • Stroke Length:  2-5/16”
  • Cycles per Minute in 3/4”: 25
  • Punching Station Work Height: 40-9/16”

Flat Bar Shearing

  • Flat Bar Shear Capacity:  7-7/8″ x 2”
  • Width x Thickness:  11-3/4” in 19/32”
  • Lower Blade:  Four (4) usable edges
  • Support Table:  Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right
  • Adjustable Hold-Down:  Holds work piece securely in position when shearing
  • Upper Shear Blade:  Provides for minimum distortion.  Two (2) usable edges
  • Blade Length:  12-1/2”
  • Angle Flange Trim:  3-5/32” x 19/32″
  • Flat Bar Shear Work Height:  35-7/16”

Angle Shearing

  • 90 degrees:  4-3/4” x 4-3/4” x 1/2”
  • 45 degrees: 2-3/4″ x 3/8″
  • Shearing with no material loss and minimum deformity
  • Shear Blades:  Four (4) usable edges
  • Work Height: 44-1/2″

Bar Shearing

  • Round Bar Capacity:  1-1/2”
  • Square Bar Capacity:  1-1/2”
  • Channel Shear: 4-3/4″ x 2-1/4″
  • H Beams: 4-3/4″ x 2-1/4″
  • T Beams: 3-5/32″ x 5-16″
  • Work Height: 35-7/16″

Notching

  • Rectangular Notcher:  3/8” x 1-3/4” x 3-9/16”
  • Large Vee: 4″ x 4″ x 3/8″
  • Notcher Work Height:  35-7/16”

Special Tooling

  • V Press Brake: 9-7/8″ x 1/2″
  • Multi Vee: 19-5/8″ x 1/8

Additional Specifications

  • Motor Drive: 7.38 H.P.
  • Weight: 3351 lbs
  • Power (Pressure): 60 Tons
  • Dimensions (LxWxH): 59″ x 37-3/8″ x 74

Other Standard Equipment Five(5) Sets of Punches and Dies:

  • Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
  • Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
  • CPD Series: 26 punch, 62 die
  • Magnetic Base Work Light
  • Adjustable Electric Back Gauge (36”)
  • 24 Volt DC Control Voltage
  • Scrap Boxes at Punching and Notching Stations
  • Adjustable Stroke Depth at Punch
  • Two (2) Full-Control Foot Pedals
  • Two (2) Hole Die Holder
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling
  • Standard Voltage 230/460 Volt, 3 Phase, 60Hz

Specifications

Punching Pressure 60 Tons Capacity 45 ° 2-3/4″ x 3/8″
Large Tooling 1-1/2” in 3/8” Capacity 90 ° 4-3/4” x 4-3/4” x 1/2”
Oversize Tooling  4” x 1/8″ Punches 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
Standard Tooling 1/2” in 1/2” Dies 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
Throat Depth 10” Machine Net Weight 3,351 lbs.
Stroke Length 2-5/16″ Machine Dimensions 59” L x 37-3/8” W x 74” H
Punching Station Work Height 40-9/16”
Round Bar Capacity 1-1/2”
Square Bar Capacity 1-1/2”
Rectangular Notcher 3/8” x 1-5/8″ x 4”
Flat Bar Shear Capacity 7-7/8” x 2″
Width x Thickness 11-3/4” x 19/32”
Blade Length 12-1/2”

 

Click here to contact us or call 800-622-1363 to place an order and get answers to your questions.