We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan Ironworkers — MSIW66S

Spartan-Ironworkers-—-MSIW66SFeatures

MSIW66S- Heavy-duty, Single Cylinder, Completely Integrated Ironworker with 66 Ton Capacity, 5.36 H.P., 8-5/8” Throat Depth, 5 Work Stations and Full Pedal Control.

Punching

  • Punch Pressure:  66 tons
  • Punch Holder and Jog Mode
  • Punch Work Table:  Includes electric back gauge
  • Standard Tooling:  1-1/8” in 19/32” material
  • Oversize Tooling:  4-5/16” in 1/8” material
  • Throat Depth:  8-5/8”
  • Stroke Length:  2-5/32”
  • Cycles per Minute in 9/16”:  25
  • Punching Station Work Height:  37-19/32″

Flat Bar Shearing

  • Flat Bar Shear Capacity:  7-7/8″ x 2″
  • Lower Blade:  Four (4) usable edges
  • Support Table:  Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right
  • Upper Shear Blade:  Provides for minimum distortion
  • Width and Thickness: 11-3/4″ x 19/32″
  • Blade Length:  12-1/2”
  • Angle Flange Trim: 3-5/32″ x 3/8″
  • Flat Bar Shear Work Height:  37-19/32”

Angle Shearing

  • 90 degrees:  4-3/4” x 4-3/4” in 1/2”
  • 45 degrees: 3-5/32″ x 5/16″
  • Shearing with no material loss and minimum deformity
  • Shear Blades:  Four (4) usable edges
  • Angle Shear Work Height:  45-1/2”

Bar Shearing

  • Round Bar Capacity:  1-1/2”
  • Square Bar Capacity:  1-3/8”
  • Channel Shear: 3-5/32″ x 1-3/4″
  • H Beams: 3-5/32″ x 1-3/4″
  • T Beams: 3-5/32″ x 5/16″
  • Bar Shear Work Height:  37-19/32″”

Notching

  • Rectangular Notcher:  3/8” x 1-5/8” in 4”
  • Large Vee:  4” x 4” x 3/8″
  • Work Height: 7-19/32″

Optional Tooling For Punch End

  • Single Vee Press Brake: 4″ x 1/2″
  • Multi Vee Press Brake: n/a

Additional Specifications

  • Motor Drive: 5.36 H.P.
  • Weight: 3174 lbs.
  • Shipping Weight: 3174 lbs.
  • Dimensions L x W x H: 59-7/8″ x 37-3/8″ x 70″
  • Power (Pressure): 66 Tons

Other Standard Equipment Five(5) Sets of Punches and Dies:

  • Punches:  9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
  • Dies:  19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
  • CPD Series: 20 punch, 55 die
  • Magnetic Base Work Light
  • 24 Volt DC Control Voltage
  • Scrap Boxes at Punching and Notching Stations
  • Hydraulic Hold-Downs at Shearing Station
  • Adjustable Back Gauge- Electric (3’)
  • Adjustable Stroke Depth at Punch Station
  • Full-Control Foot Pedals
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling
  • Standard Voltage 230/460 Volt, 3 Phase, 60Hz

Specifications

Punching Pressure 66 Tons Capacity 90 ° 4-3/4” x 4-3/4” x 1/2”
Oversize Tooling 4-5/16” in 1/8″ material Punches 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
Standard Tooling 1-1/8” in 19/32” material Dies 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
Throat Depth 8 5/8” Machine Net Weight 3,174 lbs.
Stroke Length 2-5/32″ Machine Dimensions 59-7/8” L x 37-3/8” W 70” H
Punching Station Work Height 37-19/32”
Round Bar Capacity 1-1/2”
Square Bar Capacity 1-3/8”
Rectangular Notcher 3/8” x 1-5/8” x 4”
Flat Bar Shear Capacity 7-7/8” x 2″
Blade Length 12-1/2”

 

Click here to contact us or call 800-622-1363 to place an order and get answers to your questions.