We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan Ironworkers — MSIW71D

Spartan-Ironworkers-—-MSIW60DFeatures

MSIW71D- Heavy-Duty, Dual Cylinder, Completely Integrated Ironworker with 71 Ton Capacity, 7 H.P., 12” Throat Depth, 5 Work Stations and Simultaneous Dual Operation.

Punching

  • Punch Pressure:  71 tons.
  • Punch Holder and Jog Mode
  • Punch Work Table: Includes back gauge and adjustable stops
  • Standard Tooling:  1” in 1/2”
  • Large Tooling:  2-1/4” in 3/8”
  • Oversize Tooling:  4-5/16” x 1/8”
  • Throat Depth:  12”
  • Stroke Length:  2-5/32″
  • Cycles per Minute in 3/4”:  25
  • Punching Station Work Height:  40-9/16”

Flat Bar Shearing

  • Flat Bar Shear Capacity:  11-3/4” in 2”
  • Width x Thickness:  14-3/4” in 19/32”
  • Lower Blade:  Four (4) usable edges
  • Support Table:  Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right
  • Adjustable Hold-Down:  Holds work piece securely in position when shearing
  • Upper Shear Blade:  Provides for minimum distortion.  Two (2) usable edges
  • Blade Length:  15″
  • Flat Bar Shear Work Height:  35-7/16”

Angle Shearing

  • 90 degrees:  4-3/4” x 4-3/4” x 1/2”
  • 45 degrees:  2-3/4” x 3/8”
  • Shearing with no material loss and minimum deformity
  • Shear Blades:  Four (4) usable edges
  • Angle Shear Work Height:  44-7/8”

Bar Shearing

  • Round Bar Capacity:  1-3/4”
  • Square Bar Capacity:  1-3/4”
  • Channel Shear: 4-5/7″ x 2-1/4″
  • H Beams: 4-5/7″ x 2-1/4″
  • T Beams: 3-9/16″ x 7/16″
  • Work Height: 35-4/16″

Notching

  • Rectangular Notcher:  3/8” x 1-3/4” x 3-9/16”
  • Large V: 4″ x 4″ x 3/8″
  • Electrical Interlock Safety Guard
  • Gauge Table with Stops:  For precise positioning
  • Notcher Work Height:  35-7/16”

Special Tooling

  • V Press Brake: 9-7/8″ x 19/32″
  • Multi Vee Press Brake: 19-5/8″ x 1/8″

Additional Specifications

  • Drive Motor: 7.38 H.P.
  • Net Weight: 3527 lbs
  • Machine Dimensions: 67″ x 37-3/8″ x 74″
  • Power Pressure: 71 tons

Other Standard Equipment Five(5) Sets of Punches and Dies:

  • Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
  • Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
  • CPD Series: 26 punch, 62 die
  • Magnetic Base Work Light
  • Adjustable Electric Back Gauge (36”)
  • 24 Volt DC Control Voltage
  • Scrap Boxes at Punching and Notching Stations
  • Adjustable Stroke Depth at Punch
  • Two (2) Full-Control Foot Pedals
  • Two (2) Hole Die Holder
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling
  • Standard Voltage 230/460 Volt, 3 Phase, 60Hz

Specifications

Punching Pressure 71 Tons Capacity 45 ° 2-3/4″ x 3/8″
Large Tooling 2-1/4” in 3/8” Capacity 90 ° 4-3/4” x 4-3/4” x 1/2”
Oversize Tooling 4-5/16” in 1/8” Rectangular Notcher 3/8” x 1-5/8” x 4”
Standard Tooling 1” in 1/2” Punches 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
Throat Depth 12” Dies 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
Stroke Length 2-5/32″ Machine Net Weight 3,327 lbs.
Punching Station Work Height 40-9/16” Machine Dimensions 67” L x 37-3/8” W x 74” H
Round Bar Capacity 1-3/4”
Square Bar Capacity 1-3/4”
Flat Bar Shear Capacity
11-3/4 x 2”
Maximum Width x Thickness 14-3/4” x 19/32”
Blade Length 15”

 

Click here to contact us or call 800-622-1363 to place an order and get answers to your questions.