We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan Ironworkers — MSIW93D

Spartan-Ironworkers-—-MSIW126DDX.jpgFeatures

MSIW93D- Heavy-Duty, Dual Cylinder, Completely Integrated Ironworker with 93 Ton Capacity, 10 H.P., 14” Throat Depth, 5 Work Stations and Simultaneous Dual Operation.

Punching

  • Punch Pressure:  93 tons
  • Quick Change Punch Holder and Jog Mode
  • Punch Work Table: Includes back gauge and adjustable stops
  • Standard Tooling:  1-2/7” in 1/2”
  • Large Tooling:  2-1/4”x 1/2”
  • Oversize Tooling:  4-5/16” x 1/4”
  • Throat Depth:  14”
  • Stroke Length:  3-5/32”
  • Cycles per Minute in 3/4”:  25
  • Punching Station Work Height:  42-1/2”

Flat Bar Shearing

  • Flat Bar Shear Capacity:  15” in 2”
  • Width x Thickness:  18-7/8” x 19/32”
  • Lower Blade:  Four (4) usable edges
  • Support Table:  Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right
  • Adjustable Hold-Down:  Holds work piece securely in position when shearing
  • Upper Shear Blade:  Provides for minimum distortion.  Two (2) usable edges
  • Blade Length:  19”
  • Flat Bar Shear Work Height:  37”

Angle Shearing

  • 90 degrees:  6” x  6” x 19/32”
  • 45 degrees:  3-5/32” x 3/16”
  • Shearing with no material loss and minimum deformity
  • Shear Blades:  Four (4) usable edges
  • Angle Shear Work Height:  47-1/4”

Bar Shearing

  • Round Bar Capacity:  2”
  • Square Bar Capacity:  2”
  • Channel Shear: 6-1/4″ x 3″
  • H Beam: 6-1/4″ x 3″
  • T Beam: 4″ x 7/16″
  • Work Height: 37″

Notching

  • Rectangular Notcher:  1/2” x 2” x 4”
  • Large V: 4″ x 4″ x 1/2″
  • Electrical Interlock Safety Guard
  • Gauge Table with Stops:  For precise positioning
  • Notcher Work Height:  37”

Special Tooling

  • Single Vee Press Brake:  9-7/8” x 3/4″
  • Multi Vee Press Brake: 19-5/8″ x 5/32″

Additional Specifications

  • Drive Motor: 10.06 H.P.
  • Net Weight: 5103 lbs
  • Machine Dimensions: 75″ x 37-3/8″ x 80-5/16″
  • Power (Pressure): 93 Tons

Other Standard Equipment Five(5) Sets of Punches and Dies:

  • Punches:  9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
  • Dies:  19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
  • CPD Series: 20 punch, 55 die
  • Magnetic Base Work Light
  • 24 Volt DC Control Voltage
  • Scrap Boxes at Punching and Notching Stations
  • Hydraulic Hold-Downs at Shearing Station
  • Adjustable Back Gauge- Mechanical (3’)
  • Adjustable Stroke Depth at Punch Station
  • Full-Control Foot Pedals
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling
  • Standard Voltage 230/460 Volt, 3 Phase, 60Hz

Specifications

Punching Pressure 93 Tons Capacity 45 ° 3-5/32” x 3/16”
Large Tooling 2 1/4” x 1/2” Capacity 90 ° 6” x 6” x 19/32”
Oversize Tooling 4-4/16” x 1/4” Angle Shear Work Height 47-1/4″
Standard Tooling 1-2/7” x 1/2”
Throat Depth 14”
Stroke Length 3-5/32”
Punching Station Work Height 42-1/2”
Round Bar Capacity 2”
Square Bar Capacity 2”
Channel Shear
6-1/4″ x 3″
T Beams
4″ x 7/16″
Rectangular Notcher 1/2” x 2” x 4”
Flat Bar Shear Capacity 15” in 2”
Maximum Width x Thickness 18-7/8” x 19/32”
Blade Length 19”

 

Click here to contact us or call 800-622-1363 to place an order and get answers to your questions.