We’re Here to Help. Talk to a Specialist Today!

800-622-1363

201-794-3111 (in NJ)

Fax: 201-794-0347

Spartan Ironworkers — MSIW126D/DX

Spartan-Ironworkers-—-MSIW126DDX.jpgFeatures

MSIW126D/DX- Heavy-Duty, Dual Cylinder, Completely Integrated Ironworker with 126 Ton Capacity, 15 H.P., 14” (D) 24-1/2” (DX) Throat Depth, 5 Work Stations and Simultaneous Dual Operation.

Punching

  • Punch Pressure:  126 tons
  • Quick Change Punch Holder and Jog Mode
  • Punch Work Table:  Includes back gauge and adjustable stops
  • Standard Tooling:  1-5/16” x 1”
  • Large Tooling:  2-1/8” x 5/8”
  • Oversize Tooling:  4-5/16” x 3-16”
  • Throat Depth:  14” (D); 24-1/2” (DX)
  • Stroke Length:  3-1/8”
  • Cycles per Minute in 3/4”:  25
  • Punching Station Work Height:  43-6/8”

Flat Bar Shearing

  • Flat Bar Shear Capacity:  15” x 1”
  • Width x Thickness:  24” in 5/8”
  • Lower Blade:  Four (4) usable edges
  • Support Table:  Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right
  • Adjustable Hold-Down:  Holds work piece securely in position when shearing
  • Upper Shear Blade:  Provides for minimum distortion.  Two (2) usable edges
  • Blade Length:  24”
  • Angle Flange Trim:  5” x 5/8″
  • Flat Bar Shear Work Height:  37”.

Angle Shearing

  • Maximum Capacity — 90 degrees: 8” x 8” x 3/4”
  • Maximum Capacity — 45 degrees: 3-1/8” x 3-1/8” x 3/8”
  • Shearing with no material loss and minimum deformity
  • Shear Blades: Four (4) usable edges
  • Angle Shear Work Height: 48”

Bar Shearing

  • Round Bar Capacity:  2-1/8”
  • Square Bar Capacity:  2”
  • Channel Shear:  7-3/4” x 3-1/2″
  • H-Beam Shear:  7-3/4” x 3-1/2″
  • T-Beam Shear: 4-3/4″ x 1/2″
  • Bar Shear Work Height:  37

Notching

  • Rectangular Notcher:  1/2” x 2-3/8” x 4”
  • Large V: 4″ x 4″ x 1/2″
  • Electrical Interlock Safety Guard
  • Gauge Table with Stops:  For precise positioning
  • Notcher Work Height:  37”

Special Tooling

  • Single V Press Brake: 10″ x 7/8″
  • Multi V Press Brake: 27-1/2″ x 1/8″

Additional Specifications

  • Drive Motor: 14.75 H.P.
  • Net Weight: 6,548 lbs.
  • Machine Dimensions: 87″ x 35″ x 76″
  • Power (Pressure): 126 tons

Other Standard Equipment Five(5) Sets of Punches and Dies:

  • Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
  • Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
  • CPD Series: 26 punch, 62 die
  • Magnetic Base Work Light
  • Adjustable Electric Back Gauge (39”)
  • 24 Volt DC Control Voltage
  • Scrap Boxes at Punching and Notching Stations
  • Adjustable Stroke Depth at Punch
  • Two (2) Full-Control Foot Pedals
  • Two (2) Hole Die Holder
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling
  • Standard Voltage 230/460 Volt, 3 Phase, 60Hz

Specifications

Punching Pressure 126 Tons Capacity 45 ° 3-1/8” x 3-1/8” x 3/8”
Large Tooling 2 1/8” x 5/8” Capacity 90 ° 6” x 6” x 5/8”
Oversize Tooling 4-5/16” x 3/16” Angle Shear Work Height 48″
Standard Tooling 1-5/16” x 1”
Throat Depth  14” (D); 24-1/2” (DX)
Stroke Length 3-1/8”
Punching Station Work Height 43-3/4”
Round Bar Capacity 2-1/8”
Square Bar Capacity 2”
Channel Shear
7-3/4″ x 3-1/2″
T Beam
4-3/4″ x 1/2″
Rectangular Notcher 1/2” x 2-3/8” x 4”
Flat Bar Shear Capacity 15” in 1”
Maximum Width x Thickness 24” x 5/8”
Blade Length 24”

 

Click here to contact us or call 800-622-1363 to place an order and get answers to your questions.